Živko Pavlović rođen je 27.05.1977. godine. Od 2002. do 2006. godine radi kao asistent pripravnik, a od 2007. do 2012. kao asistent na Fakultetu tehničkih nauka Univerziteta u Novom Sadu. Kao docent radi od 2012. do 2017. radi kao docent a od 2017. je vanredni profesor na istom fakultetu na departmanu za Grafičko inžinjerstvo i dizajn.  

 

Naučni  i stručni radovi:

  1. Pavlović Ž., Dedijer S., Draganov S., Karlović I., Jurič (Rilovski) I.: Printing on Polymers, chapter Offset Printing, Amsterdam, Elsevier Inc, 2015, pp.. 217-238, ISBN 9780323374682 (M13)
  2. Adamović (Majkić) S., Prica M., Dalmacija B., Rapajić S., Novaković D., Pavlović Ž., Maletić S.: Feasibility of electrocoagulation/flotation treatment of waste offset printing developer based on the response surface analysis, Arabian Journal of Chemistry, 2015, ISSN 1878-5352, UDK: DOI: http://dx.doi.org/10.1016/j.arabjc.2015.03.018 (M21)
  3. Urbas R., Milošević R., Kašiković N., Pavlović Ž., Stankovič Elesini U.: Microcapsules application in graphic arts industry: a review on the state-of-the-art, Iranian Polymer Journal, 2017, Vol. 26, No 7, pp. 541-561, ISSN 1735-5265, UDK: doi:10.1007/s13726-017-0541-1 (M22)
  4. Risović D., Pavlović Ž.: Performance Assessment of Methods for Estimation of Fractal Dimension From Scanning Electron Microscope Images, Scanning, 2013, Vol. 35, No 6, pp. 402-411, ISSN 0161-0457 (M22)
  5. Pavlović Ž., Muck T., Hladnik A., Karlović I.: A Comparative Study of Offset Plate Quality Parameters using Image Processing and Analytical Methods, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2012, Vol. 9, No 6, pp. 181-193, ISSN 1785-8860 (M22)
  6. Pavlović Ž., Novaković D., Cigula T.: Wear analysis of the offset printing plate`s non/printing areas depending on exploitation, Tehnicki vjesnik – Technical Gazette, 2012, Vol. 19, No 3, pp. 479-484, ISSN 1330-3651, UDK: 655.344:620.178.16 (M22)
  7. Pavlović Ž., Risović D., Novaković D.: Comparative study of direct and indirect, image-based profilometry in characterization of surface roughness,, Surface and Interface Analysis, 2012, Vol. 44, No 7, pp. 825-830, ISSN 0142-2421, UDK: Online ISSN:1096-9918 (M23)
  8. Pavlović Ž., Dedijer S., Kašiković N., Novaković D., Pál (Apro) M., Risović D.: Evaluation of effective models of offset CTP plate aluminium oxide surface roughness characterisation, International Journal of Surface Science and Engineering, 2017, Vol. 11, No 5, pp. 433-449, ISSN 1749-7868 (M23)
  9. Spiridonov I., Boeva R., Lozanova-Doncheva I., Bozhkova T., Pavlović Ž., Vladić G., Kašiković N., Stančić M., Tacheva B.: Study of color characteristic changes of printed images under artificial ageing on different papers, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 229-236, ISSN 0324-1130 (M23)
  10. Pavlović Ž., Pál (Apro) M., Cigula T., Rumyana B., Boeva R., Spiridonov I., Bozhkova T., Prica M.: Comparative study of offset plate tone value reproduction using different measuring and image processing tools, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 222-228, ISSN 0324-1130 (M23)
  11. Boeva R., Spiridonov I., Pavlović Ž., Vladić G.: Investigation of color characteristics changes of semi chemical pulp samples in process of ageing, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 126-129, ISSN 0324-1130 (M23)
  12. Pál (Apro) M., Dedijer S., Kašiković N., Vladić G., Novaković D., Pavlović Ž., Banjanin B.: Investigation of adhesive layer thickness distribution of perfect bounded broshures, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 90-96 (M33)
  13. Milošević R., Kašiković N., Pavlović Ž., Stančić M., Urbas R.: Characterization of Coated Prints With Fragranced Microcapsules, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehničkih nauka, 8-10 Novembar, 2018, pp. 181-188, ISBN 978-86-6022-115-7 (M33)
  14. Dedijer S., Tomić I., Pál (Apro) M., Jurič (Rilovski) I., Pavlović Ž., Milić N.: Repeatability and reproduction accuracy in electrophotography for color difference evaluations, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 313-321, ISBN 978-86-6022-115-7 (M33)
  15. Milošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Kukuruzović D., Urbas R.: INFLUENCE OF MICROCAPSULES’ CONCENTRATION ON THE PHYSICAL AND SURFACE CHARACTERISTICS OF THE PRINTS, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 133-142, ISBN 978-9944-0636-7-8 (M33)
  16. Kašiković N., Vladić G., Milošević R., Đurđević S., Jurič (Rilovski) I., Novaković D., Pavlović Ž.: RUBBING FASTNESS PROPERTIES OF DIGITAL PRINTED SAMPLES, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 295-393, ISBN 978-9944-0636-7-8 (M33)
  17. Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 October, 2017, pp. 273-282, ISBN 978-9944-0636-7-8 (M33)
  18. Dedijer S., Pál (Apro) M., Pavlović Ž., Vladić G., Novaković D.: Possibilites of Flexo Printing Plate Elements Characterisation by Image Processing, 5. International Joint Conference on Environmental and Light Industry Technologies, Budapest: Obuda University, 19-20 Novembar, 2015, pp. 82-91, ISBN 978-615-5460-60-9 (M33)
  19. Milošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Cigula T., Urbas R.: Analysis of Coatings With Scented Microcapsules, 1. International Conference on Electron Microscopy of Nanostructures ((ELMINA), Beograd: Serbian Academy of Sciences and Arts, 27-29 Avgust, 2018, pp. 131-133, ISBN 978-86-7025-785-6 (M34)
  20. Urbas R., Milošević R., Pavlović Ž., Kašiković N., Stankovič Elesini U.: Microcapsule structure and its application in the printing industry, 9. International Engineering Symposium at Banki Budapest, Budimpešta: Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering, 27 Novembar, 2017, pp. 83-83 (M34)
  21. Pál (Apro) M., Koltai L., Dedijer S., Kašiković N., Pavlović Ž., Vladić G., Tomić I.: Preliminary analysis of crack distribution for objective fold-crack assessment, 1. IJCELIT 2017 – International Joint Conference on Enviromental and Light Industry Technologies, Budapest: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, pp. 27-27, ISBN 978-963-449-061-6 (M34)
  22. Dedijer S., Pál (Apro) M., Tomić I., Pavlović Ž., Vasić J., Vladić G., Kašiković N.: Study of line and dot elements reproduction on digital flexo printing plates using flexcel nx imaging technology, 1. IJCELIT 2017 – International Joint Conference on Enviromental and Light Industry Technologies, Budapest: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, ISBN 978-963-449-061-6 (M34)
  23. Pavlović Ž.: Karakterizacija površinske strukture neštampajućih elemenata CtP termalne štamparske forme za ofset štampu, Novi Sad, 2012 (M71)
  24. Pavlović Ž.: Savremeni pristup razvoju merno kontrolnih traka za procesnu grafičku kontrolu, Magistarska teza , Novi Sad, Fakultet tehničkih nauka, 2007 (M72)
  25. Novaković D., Pavlović Ž., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015 (M85)

 

 

Rad na projektima

  • Razvoj softverskog modela za unapreõenje znanja i proizvodnje u grafičkoj industriji (2011-2017)
  • Research and Education in the field of Graphic Engineering and Design, CEEPUS CIII-RS-0704- 09-1314 (2012 —2022)
  • A L.I.C.E, CEEPUS CIII-SI-0709—03—1314 (2014 —2021
  • New possibilites for print media and packaging — combining print with digital FPS COST Action FP1104 (2012-2016)
  • Development of mechanical engineering (design, technology and production management) as an essential base for progress in the area of small and medium companies’ logistics – research, preparation and implementation of joint programs of study, CIII-PL-0033-12-1617 (2011-2012)
  • Procena uticaja otpadnih štampanih grafičkih materijala na životnu sredinu u APV (2013)
  • Istraživanje procesa implementacije modela osećaja boja u savremenim sístemima za upra’vljanje bojom u grafičkoj industriji nvironmental (2008- 2011)
  • Fundametalni problemi razvoja štamparskih formi bez konvencionalnog razvijanja (2007)
  • lstraživanje u oblasti grafičke delatnosti: zaštita životne i radne sredine (2005)
  • Od kompjutera do štampe (2004-2007)
  • Rukovodilac Master studija na departmanu za Grafićko inženjerstvo i dizajn
  • Recenzent u časopisu Technical gazzete
  • Recenzent u časopisu Acta Graphica
    • Recenzent u časopisu Acta Polytechnica Hungarica
    • Recenzent u ćasopisu Cellulose Chemistry and Technology
    • Recenzent u časopisu Dyes and Pigments
    • Recenzent u časopisu Journal of Graphic engineering and design
    • Recenzent u časopisu Zbornìk radova fakulteta tehnickih nauka